在Minelab，我们得到您的热情。和你一样，我们永远不会忘记任何一块石头。同样的勇气和决心促使我们将每件产品和每项创新都做得更好。
困难的铁质目标 - 所有探测器的共同敌人。那是直到EQUINOX。点击我们的EQUINOX更新下载，让那些讨厌的瓶盖，生锈的钉子和其他打击目标成为过去。启动Minelab Update Utility，即可开始使用。这很简单。您将体验到增强的铁偏置功能，改进的EQUINOX 600背光等等。
改善铁偏见
通过添加新的Iron Bias设置配置文件，Iron Bias得到了增强。最初的EQUINOX Iron Bias'FE'设置仍然可用，但现在可以选择切换到新的Iron Bias'F2'设置，这些设置具有更强的功能，可以拒绝更广泛的难度铁靶，包括瓶子帽。
EQUINOX 600背光亮度
EQUINOX 600现在能够将背光亮度调节到符合EQUINOX 800最小设置的额外“低”设置。这种“低”亮度非常适合在夜间和弱光条件下进行检测。
Minimum System Requirements:
USB 2.0 port
EQUINOX USB Charging Cable with Magnetic Connector
Windows 10
50 MB of hard drive space
20 MB of RAM
MAC OS
Greater than 10.13 High Sierra
50 MB of hard drive space
30 MB of RAM
Note:
Important: Do not turn off or disconnect the EQUINOX 600 / 800 during the update process.
Download the Update Utility 2.0.1
EQUINOX 600 / 800 Update Utility (Windows)
EQUINOX 600 / 800 Update Utility (Mac)
Once the MUU is downloaded, open the application and follow these instructions:
|
1. Connect the EQUINOX 600 / 800 to the computer USB port using the magnetic charging cable and turn on the detector. |
 |
|
2. When the EQUINOX 600 / 800 is identified, the MUU will communicate with the detector and determine the current software version. |
 |
|
3. If an update is available, the MUU will display Updates are available for your detector. Click INSTALL to begin the upgrade or QUIT to close the MUU. |
 |
|
4. If the metal detector is up to date, the application will display Your detector is up to date and prompt you to QUIT the application. |
 |
|
5. The EQUINOX 600 / 800 screen will go blank during the update; a green LED on the top left corner of the control box will blink rapidly while the update is in progress. |
 |
|
6. Installation will take approximately 1 minute. Once the upgrade is complete, the EQUINOX 600 / 800 will restart and the MUU will prompt you to disconnect the detector and QUIT the application. Note: Close the application and reopen if updating multiple EQUINOX 600 / 800 detectors |
 |
Q: Why is the Minelab Update Utility (MUU) not connecting to my detector?
A: Make sure your EQUINOX 600 / 800 detector is connected to your PC via the magnetic USB/Charging cable, and switched on and make sure there’s only one instance of the MUU running. Check the magnetic connector is properly seated on the detector. Try re-starting the MUU. If you still can’t connect, switch off the detector, close and re-start the MUU, and re-connect and switch on your detector.
This MUU will not communicate with the EQUINOX 700 / 900 detectors.
Q: What happens if the detector disconnected while installing the upgrade?
A: The MUU can recover the detector functionality after any disconnection during upgrade. Switch off the detector, close and restart the MUU, and switch on and connect the detector to your computer. The detector screen may remain blank, but the MUU will see the detector and offer an upgrade. Install the upgrade and the detector will recover.
Q: What happens if I want to downgrade back to the old version?
A: The latest released MUU contains all released versions of EQUINOX software – to downgrade, click on the three dots in the bottom right of the MUU screen, select the version you want to downgrade to, and click install.
Q: Why have I lost my detector settings during downgrade or upgrade?
A: Using an old version of the MUU may result in your settings being reset to factory presets if upgrading/downgrading between the latest and earlier versions. Make sure you delete any previous version of the MUU before downloading the new version from the Minelab website.
Q: Where can I find the MUU with the new EQUINOX 600 / 800 software?
A: Download the MUU from the EQUINOX 600 or EQUINOX 800 page on the Minelab Website, under ‘Downloads’.
Q: Help! My detector is non-functional after an upgrade!
A: Don’t worry, the MUU can always recover the detector in the event an upgrade is interrupted. Simply power on the detector, connect to a PC running the MUU and re-start the upgrade.
